Notebook drives conservation tips
- Autor:Ms. Luo
- Fuente:http://www.bluraysupplier.com
- Suelte el:2014-12-21
Notebook drives conservation tips:
1. Keep the CD-ROM, CD-ROM cleaner
CD-ROM drive uses a very sophisticated optical components, optical components and fear of dust contamination. Dust from loading the disc, quit the entire process, the disc is clean on the drive's life expectancy is directly related. Therefore, the CD-ROM drive before loading should be necessary to clean, do not use the disc to keep, to prevent dust pollution.
2. Regular cleaning and maintenance of the laser head
Drive after a period of use, the laser head is bound to catch some dirt, so that a reduced ability to read the disk drive. Specific performance slowed to read the disk, display pictures and sound mosaic or pause, in severe cases can hear the sound of the disc drive frequently read. These phenomena on the laser head and the drive motor and other components have damage. Therefore, users should regularly carry out cleaning and maintenance of the drive or for a professional maintenance.
3. Keep the drive horizontally
In the course of the machine, the drive to maintain the level of placement. The reason for this is due to an imbalance CD gravity vary during the rotation, while a slight decline can read the disk capacity, severe cases may damage the laser head. Some people use a computer CD-ROM drive to install software on different machines, often used to take to remove the optical drive, and even portable, which is very damaging to the drive. Its hazards are optical components inside the drive, laser head tilted due to vibration and changes, resulting in drive performance.
4. develop timely take off front plate habit
Once inside the disc drive there, not only when the computer starts to have a very long load times, and the disc will always be in high-speed rotation state. This will not only increase the laser head of the working hours, but also the motor and transmission components inside the drive is in the state of wear, virtually shorten the life of the drive. Users are advised to develop before shutting promptly removed from the CD-ROM drive habits.
5. Reducing working hours drive
In order to reduce drive time, in order to extend its life, the use of computer users in the hard disk space allows, you can often use the CD to make virtual CD stored on the hard disk. Such as educational software, game software is stored on the hard drive, so that later can be run directly on the hard disk, and has the speed and quickness.
6. less pirated discs, the use of genuine CD
Many of my friends because of the price of pirated discs and genuine CD prices have a certain gap, coupled with rich contents of the disc to buy used, based on China's national conditions, this is beyond reproach, but as long to read pirated CD-ROM discs, because of the poor quality of the disc, the laser head needs to repeatedly read the data. Such motors with increased working hours laser head, thus greatly reducing the life of the drive. Currently the price of genuine software has greatly declined, some only slightly more expensive than pirated software, CD-ROM drive and a guarantee.
7. The correct opening and closing the cartridge
Either drive, the front panel has a box on and off button box, use this button to switch the drive correctly conventional cartridge approach. When the key is not overexert finger to prevent the keys out of control. Some users accustomed to bare hands to push back the cartridge, which is a CD-ROM drive gear damage, it is recommended to overcome this bad habit.
8. The use of procedures for opening and closing the cartridge
Use program switch cartridge, there is such a feature in a lot of software or media player tool. As in Windows, right-click the CD-ROM drive letter, the pop-up menu also has a "pop-up" command, you can eject the disc tray. Recommended to use the software to control the opening and closing the cartridge, which can reduce the incidence of drive failure.
9. careful maintenance
Because all components within the drive are very sophisticated, users open and install the drive in the process must pay attention to ways and means to pay attention to record the original fixed position. If you are not sure, it can ask a professional maintenance staff disassembly and repair. In particular laser aging, need to adjust the drive to improve the laser tube power supply, be sure to ask a professional maintenance staff and commissioning, to prevent their own adjustments too large, so that the laser head burned.
10. Try to put less DVD
This avoids the drive to work long hours, for a long time to read the disk drive in a row, a great impact on the life of the drive. Users may need to regularly broadcast programs, it is best to copy into the hard drive, CD-ROM drive to ensure longevity. If you do depends a lot on DVD, it is recommended to buy a cheap low-speed CD-ROM designed to playback VCD.
1. Keep the CD-ROM, CD-ROM cleaner
CD-ROM drive uses a very sophisticated optical components, optical components and fear of dust contamination. Dust from loading the disc, quit the entire process, the disc is clean on the drive's life expectancy is directly related. Therefore, the CD-ROM drive before loading should be necessary to clean, do not use the disc to keep, to prevent dust pollution.
2. Regular cleaning and maintenance of the laser head
Drive after a period of use, the laser head is bound to catch some dirt, so that a reduced ability to read the disk drive. Specific performance slowed to read the disk, display pictures and sound mosaic or pause, in severe cases can hear the sound of the disc drive frequently read. These phenomena on the laser head and the drive motor and other components have damage. Therefore, users should regularly carry out cleaning and maintenance of the drive or for a professional maintenance.
3. Keep the drive horizontally
In the course of the machine, the drive to maintain the level of placement. The reason for this is due to an imbalance CD gravity vary during the rotation, while a slight decline can read the disk capacity, severe cases may damage the laser head. Some people use a computer CD-ROM drive to install software on different machines, often used to take to remove the optical drive, and even portable, which is very damaging to the drive. Its hazards are optical components inside the drive, laser head tilted due to vibration and changes, resulting in drive performance.
4. develop timely take off front plate habit
Once inside the disc drive there, not only when the computer starts to have a very long load times, and the disc will always be in high-speed rotation state. This will not only increase the laser head of the working hours, but also the motor and transmission components inside the drive is in the state of wear, virtually shorten the life of the drive. Users are advised to develop before shutting promptly removed from the CD-ROM drive habits.
5. Reducing working hours drive
In order to reduce drive time, in order to extend its life, the use of computer users in the hard disk space allows, you can often use the CD to make virtual CD stored on the hard disk. Such as educational software, game software is stored on the hard drive, so that later can be run directly on the hard disk, and has the speed and quickness.
6. less pirated discs, the use of genuine CD
Many of my friends because of the price of pirated discs and genuine CD prices have a certain gap, coupled with rich contents of the disc to buy used, based on China's national conditions, this is beyond reproach, but as long to read pirated CD-ROM discs, because of the poor quality of the disc, the laser head needs to repeatedly read the data. Such motors with increased working hours laser head, thus greatly reducing the life of the drive. Currently the price of genuine software has greatly declined, some only slightly more expensive than pirated software, CD-ROM drive and a guarantee.
7. The correct opening and closing the cartridge
Either drive, the front panel has a box on and off button box, use this button to switch the drive correctly conventional cartridge approach. When the key is not overexert finger to prevent the keys out of control. Some users accustomed to bare hands to push back the cartridge, which is a CD-ROM drive gear damage, it is recommended to overcome this bad habit.
8. The use of procedures for opening and closing the cartridge
Use program switch cartridge, there is such a feature in a lot of software or media player tool. As in Windows, right-click the CD-ROM drive letter, the pop-up menu also has a "pop-up" command, you can eject the disc tray. Recommended to use the software to control the opening and closing the cartridge, which can reduce the incidence of drive failure.
9. careful maintenance
Because all components within the drive are very sophisticated, users open and install the drive in the process must pay attention to ways and means to pay attention to record the original fixed position. If you are not sure, it can ask a professional maintenance staff disassembly and repair. In particular laser aging, need to adjust the drive to improve the laser tube power supply, be sure to ask a professional maintenance staff and commissioning, to prevent their own adjustments too large, so that the laser head burned.
10. Try to put less DVD
This avoids the drive to work long hours, for a long time to read the disk drive in a row, a great impact on the life of the drive. Users may need to regularly broadcast programs, it is best to copy into the hard drive, CD-ROM drive to ensure longevity. If you do depends a lot on DVD, it is recommended to buy a cheap low-speed CD-ROM designed to playback VCD.