Wi-Fi Radio Specifications
• AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2x2MIMO and 2.4 GHz 2x2 MIMO
• Software-configurable dual radio supports 5 GHz (Radio 0)and 2.4 GHz (Radio 1)
• 5 GHz:- Two spatial stream Single User (SU) MIMO for up to
1.2 Gbps wireless data rate with individual 2SS HE80
802.11ax client devices, or with two 1SS HE80 802.11ax
MU-MIMO capable client devices simultaneously
• 2.4 GHz-
Two spatial stream Single User (SU) MIMO for up to 574
Mbps (287 Mbps) wireless data rate with individual 2SS
HE40 (HE20) 802.11ax client devices or with two 1SS
HE40 (HE20) 802.11ax MU-MIMO capable client devices
simultaneously
• Up to 256 associated client devices per radio
• Up to 16 BSSIDs per radio
• Supported frequency bands (country-specific restrictionsapply):
- 2.400 to 2.4835 GHz-
5.150 to 5.250 GHz

- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
- 5.850 to 5.925 GHz
- 5.825 to 5.875 GHz
• Available channels: Dependent on configured regulatory
domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division
multiplexing (OFDM)
- 802.11ax: Orthogonal frequency-division multiple access
(OFDMA) with up to 16 resource units (RU)
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
(proprietary extension)
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM,
1024-QAM (proprietary extension)
- 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM ,
1024-QAM
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support: VHT
20/40/80
• 802.11ax high efficiency (HE) support: HE20/40/80
• Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40),
400 with 256-QAM
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2,
VHT20 to VHT80), 1,083 with 1024-QAM
- 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1
to 2, HE20 to HE40)
• 802.11n/ac/ax Packet aggregation: A-MPDU, A-MSDU
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum (conducted) transmit power (limited by local
regulatory requirements):
- 2.4 GHz band: +23 dBm per chain, +26 dBm aggregate
(2x2)
- 5 GHz band: +23 dBm per chain, +26 dBm aggregate
(2x2)
- Note: conducted transmit power levels exclude antenna
gain.
Transmit Beamforming
(TxBF)
Increased signal reliability and range
Passpoint Release 2 Seamless cellular-to-Wi-Fi carryover for
guests
Dynamic Frequency
Selection (DFS)
Optimized use of available RF spectrum
Maximal Ratio
Combining (MRC)
Improved receiver performance for multiantenna access points.
Cyclic Delay/Shift
Diversity (CDD/CSD)
Enable use of multiple transmit antennas
Space-Time Block
Coding (STBC)
Increased connection robustness
Low-Density Parity
Check (LDPC)
High performance error detection and
correction coding for enhanced receiver
performance.

Mechanical

Dimensions/weight (excluding mount):
• 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
• 6.5” (W) x 6.5” (D) x 4.3” (H)
• 1.03 kg/2.27 lbs